8610-EnGenius Changelog

Release Date Aug 17, 2007

Changed

• Disable UART(RS-232) function.

Release Date Jun 25, 2007

New Features

• SNMPv2c
• MIBI/II function

Problems Resolved

• SNMP MIBII does not work in AP mode and CB mode. (20061123_2)
• In AP and CB mode, the Telnet Console is not shown as the telnetd does not push client to do echo cmd. (20061123_14)
• The AP SNMPD will hang when doing get-next continously.When doing snmp walk, the CB SNMPD will hang. (20070503_35)
• Some SenaoMIB tree nodes can't walk all OID. (20070509_01)
• The password OID can't get info in senao mib. (20070509_02)

Changed

• Change default 802.11 Mode from "Mixed 802.11g and 802.11b" to "802.11a only".
• Change the GB item of Country Domain from "GB - UNITED_KINGDOM" to "GB BAND C".And only reserve CH 149,153,157,161,165 for "GB BAND C".
• Change logo to EnGenius version.
• Change default SSID from "default" to "Engenius".

Release Date May 07, 2007

Problems Resolved

• The Antenna Selection should be "Internal Panel", NOT "Path" only. (20070503_1)
• The Antenna Selection should be "External Antenna", NOT "External" only. (20070503_2)
• The message for external antenna selection contains one invalid mark. (20070503_3)
• After saved the time settings in CB mode, the web shows" configuring the router...". It should be the "client bridge". (20070503_20)
• When saving the country-code, the web will show "Please Setting...". It should be "Please set....". (20070503_21)
• When setting the country-code to US/Canada, the 11g channel list will be 1~14. (20070503_23)
• When setting the country-code to US/Canada, the 11b channel list will be 1~14. (20070503_24)
• When setting the country-code to AU, the 11g channel list will be 1~14. (20070503_26)
• When setting the country-code to AU, the 11b channel list will be 1~14. (20070503_27)
• When setting the country-code to GB, the 11g channel list will be 1~14. (20070503_28)
• When setting the country-code to GB, the 11g channel list will be 1~14. (20070503_29)
• The release note should be written in UTF-8, NOT Chinese-big5. Or user will be asked to install the Chinese language pack, go find the WinXP CD and then spend long time to install to read the changelog. (20070503_32)
• The .255 should be added to the subnet mask in the MIB description. (20070503_38)
• The SSID web page of Wireless Mode displays "ASSCII". It should be "ASCII". (20070503_39)

Release Date Apr. 26, 2007

New Features

• Country Domain
• DFS
• RS-232
• Layer 2 isolation

Problems Resolved

• The AP will continuously reboot when upgrading from V1.95_Final in AP mode. (20070322_1)
• When upgrading from V1.95_Final in AP mode, the old AP f/w settings will NOT be reset to factory default. (20070322_2)
• The IP address will NOT be reset to factory default when upgrading from f/w V1.9.5_Final in CB mode. (20070322_3)
• When upgrading from V1.9.5_Final in CB mode,the Web/Telnet cannot login if we have set the user/pass in the old f/w. (20070322_4)
• The serial console does NOT work on NOC-8610 series. (20070119_1)
• Cannot reset to factory default via serial console on NOC-8610 series. (20070119_2)
• 11a low power problem.

Changed

• Antenna Diversity display string changed to Antenna Selection and setting path to default.

Release Date Mar. 20, 2007

New Features

• Antenna Diversity

Problems Resolved

• SNMP Trap does Not Work in V1.9.0. (20061123_1)
• SNMP MIBII does not work. (20061123_2)
• AP SNMP OID failure. (20061123_3.1)
• SNMP R/W errors in CB mode. (20061123_3.2)
• No R/W/Trap Community config. in SNMP. (20061123_5)
• AP continuously reboots after upgrading from the web (web1.8.2 -> web1.9.0). (20061123_12)
• After setting in WEP64bit/10keys and reboot, the WEP config. Page can be entered more than 11 keys. After saving, it shows "only 10 keys are allowed. (20061214_4)
• In the future firmware release, the channel list of the Telnet console should be got by the country code of the MiniPCI. (20061218_1)
• In the System -> Firmware Menu, it says"¡Ksave the current configuration from the Tools -> Admin Screen." It should be "System -> Administrator" Screen. (20061218_2)
• In the future firmware release, the firmware should check the Input Value of deviceName on SNMP Console to avoid CB reset. (20061219_2)
• In the future firmware release, the firmware should check the Input Value of WPA_PSK on Telnet Console to avoid disassociation under WPA mode. It can now still be entered 64bit hex. Keys. (20061220_2)
• In AP/CB mode, the RTS Threshold should be between 0 ~2347. The default should be 2347. (20070105_1)
• The Frag. Threshold in AP/CB should be between 256~2346. (20070105_2)
• The 11a channel list does NOT support the latest AU domain. (20070110_1)
• The channel list of 11b/g is ETSI which is NOT AU domain. (20070110_2)
• The unit of ACK_A timeout should be £gs. (20070117_2)
• The ACK_A timeout range should be 44£gs ~ 60£gs, NOT 1 ~ 65535.(20070117_3)
• If we enter 0 or 255 in last digit of the IP address via SNMP, the AP/CB will NOT be able to access anymore. Please check the input value of the ipAddress in SNMP. (20070117_4)
• When keying the invalid subnetMask via SNMP, the AP/CB is NOT accessible. Please check the input value of the subnetMask in SNMP. (20070117_5)
• When entering >48 characters in SSID via SNMP, the AP will reset twice. Please check the input value of the connectedToSSID in SNMP. (20070117_6)
• In the SNMP OID deviceName, the AP will crash if the value is greater than 48 characters. Please check the input value of deviceName in AP mode . (20070117_7)
• On telnet console, the invalid subnetMask can be entered so that the device will NOT be able to access after saving and reboot. (20070117_8)
• In CB adhoc mode, the wireless site_survey will come out the real MAC address of another adhoc node and empty SSID with channel 0. (20070119_9)
  

Release Date Jan. 10, 2007

New Features

• SNMP
• Telnet

Problems Resolved

• Remove unused Wizard by suggest.
• Move Advanced function to [Wireless\Advanced] by suggest.
• Disabled DHCP Server at factory default by suggest in the AP mode.
  

Changed

• Removed Wizard function at AP and CB web page.
• Move Advanced function from [System\Advanced] to [Wireless\Advanced] at AP and CB web function tree.
• DHCP Server is disabled by factory default at AP mode.

To Do

• AP mode:

  1. Add private SNMP character
  2. Add Telnet Character
  3. Disabled DHCP Server by factory default
  4. Remove Wizard function
  5. Move Advanced function to [Wireless\Advanced] in the web function tree.
  
  

  CB mode:

  1. Add privateSNMP character
  2. Add Telnet character
  3. Remove Wizard function
  4. Move Advanced function to [Wireless\Advanced] in the web function tree.